Nikon N8000s Cameras

The PowerST4 Receiver enables remote power control of Elinchrom RX flashes with a camera-mounted PocketWizard MiniTT1 Transmitter or FlexTT5 Transciever. PocketWizard ControlTL technology allows you to control the flash power level using the camera’s Flash Exposure Control (FEC). The PowerTracking feature automatically adjusts flash power to maintain the photographer-established level and thus proper exposure when the aperture and/or ISO is changed. Slide the new PocketWizard AC3 ZoneController into the shoe of the camera-mounted MiniTT1 or FlexTT5 and ST4 linked Elinchrom RX flashes can be controlled in three zones: A, B, and C in 1/3-stop increments over a six-stop range. The ST4 can also receive standard PocketWizard signals from a Plus, Plus II and MultiMAX transmitter. Set for Channel 1 at the factory, the ST4 can be easily set for any of the 20 ControlTL or 32 standard channels using the units' LEARN function or by USB connection with the PocketWizard Utility software. The PowerST4 draws its power directly from the Elinchrom RX flash remote control socket; there’s no need to install or replace batteries. The PocketWizard PowerST4 is a must-have for Canon photographers using PocketWizard with Elinchrom RX flash units.

Color: Black Brand: Pocket Wizard Model: ST4 Dimensions: 2.20" h x 1.00" w x 3.60" l, .77 pounds Uses All PocketWizard Channels: The PowerST4 can be programmed as needed with up to 20 ControlTL channels for Manual Power Control, or 32 standard channels for simple triggering. Programmable and Upgradeable: Use the PocketWizard Utility with the PowerST4?s USB port to program the receiver to any PocketWizard channel and zone. Manual Power Control: When the PowerST4 is paired with either the MiniTT1 or FlexTT5 on camera Use the AC3 ZoneController to control up to three zones of light with as many lights in each zone as you want. Use the A-B-C zone switch on the PowerST4 to assign the zone. HyperSync: HyperSync allows achieving faster X-sync speeds, as fast as 1/8000 second, with full power flash to better freeze action and use wide apertures in bright ambient-light conditions.

PowerST4 About the PowerST4 The PowerST4 Receiver enables remote power control of Elinchrom RX flashes using PocketWizard ControlTL technology. With a MiniTT1 Transmitter or FlexTT5 Transceiver on your camera and a PowerST4 plugged into your Elinchrom RX flash, you can now adjust the flash power settings directly from the camera position. Add the AC3 ZoneController and you can control three different zones of lights in 1/3-stop increments with up to a six-stop range. Utilize PocketWizard's unique features such as HyperSync and Optimized Rear Curtain Sync for maximum control of your lighting. Key Benefits: Use PowerTracking and when you change ISO or aperture, the lights automatically adjust their power setting. Add the AC3 ZoneController to control up to three zones of light independently. Use the AC3's Manual Mode and adjust the output of your Elinchrom RX flashes from the camera position in 1/3rd stop increments. Combine manual and auto modes or toggle zones on and off and unleash your creativity. Use HyperSync to increase your maximum x-sync speed and Optimized Rear Curtain Sync to create natural looking movement in your images.

Most helpful customer reviews 0 of 0 people found the following review helpful. Pocket Wizard Elinchrom Ranger from R Jeff Bottari, I have very happy since I ordered my power ST4 PocketWizard receiver for Elinchrom RX. I use it on my Elinchrom Ranger RX and could not be happier. Before, I was a PocketWizard Multimax attachment to an Elinchrom sync to minimize whatever flop around and be a pain, trying to keep from swinging everywhere. Use this ST4 receiver makes life easier and more compact shoot with my Ranger unit. You just need Elinchrom Skyport Adapter and you're ready. I did not need to update the firmware, but PocketWizard Utility allows me to get a new update. Thanks Amazon for saving me a few dollars! All 1 reviews ...